Customize

Custom Off-Road Packages

enhanced slide
with clamp

The "stock" ESR750 series is already unmatched in its hill climbing ability, but we've put together a special set of options to customize your Go-Ped and make it ideal for venues where there is a lot of dirt, gravel, or grass, plus lots of steep hills.  By combining special "All-Terrain" tires, our enhanced handlebar slide with clamp, a different gear set and chain, plus reprogramming the motor controller/computer, your ability to go off-road and up the steepest of hills will be enhanced by about 10 percent.  Off-road and Hill Package 1 must be ordered with your Go-Ped and requires local pickup at this time.

• Application Notes: The AT tires work better on softer surfaces and increase ground clearance somewhat, plus our enhanced handlebar slide adds a slot and clamp to keep the steering tight and secure over bumpy roads.  The normal drive gear ratio is 76/15-tooth and by replacing this with an 80/13-tooth gear ratio your top speed will be reduced slightly but acceleration and hill climbing will be improved slightly.  This also helps to compensate for the slightly higher gearing that comes from the slightly larger AT tires.  We custom re-program the motor controller so that you have enough power and speed in econo mode to keep you going up to 15mph and climb more hills without switching to turbo.
   
• Shipping: Please note that this option require local pickup and drop shipping of your scooter is not available at this time.  If you want to have your scooter drop shipped and/or you have previously purchased a scooter and would like to customize it you may purchase our Off-road and Hill Package 2.
   
• Compatibility:  ESR750 or EX only

Off-road and Hill Package 2 (2007 and older models)

If you'd like us to ship you the parts included above, this package includes TWO "AT" Tires, ONE enhanced handlebar slide, ONE 80/13-tooth gear combination, and ONE longer chain that you may install yourself (about a 45 minute job, be sure to deflate your tires before removal).

LEAD TIME: Approximately 2 weeks

OFFRD-PKG PRICE	PACKAGE1	PACKAGE2
$150.00

Custom Color Trim Packages (black scooters recommended)

custom painted
rear fender
(aqua metallic)

also available
purple metallic
and
lime green
(not shown)

We've put together a special color-coordinated package to really set your Go-Ped apart from the crowd.  By ordering this package you will get a custom painted and enhanced handlebar slide tube (normally black/silver and without a clamp) plus a custom painted rear fender and matching pin-striping detail (photos soon).  If you order the optional seat kit at the same time, we'll include color-coordinated pin-striping on the seat post. 

• Shipping: Please note that this option require local pickup and drop shipping of your scooter is not available yet.  If you want to have your scooter drop shipped and/or you have previously purchased a scooter and would like to customize it you may purchase Color Trip Package 2 which includes new parts that you may install yourself or you may bring your scooter in for installation.
   
• Compatibility: ESR750, EX, or H only

Color Trim Package 2

Everything in Package 1 except the pin-striping shipped to you for installation, this will include a new enhanced and painted handlebar slide tube and painted rear fender.  If you order this package w/o a scooter these items will be drop shipped (assumes package 2).

LEAD TIME: Approximately 2 weeks

COLOR-PKG PRICE	AQUA MET	PURPLE MET	LIME GREEN
$175.00